Here's the old muffler off the car. If you look closely at the 3rd picture you can see the Ford Emblem. I bet that looked nice off the line, damn rust belt.
Got the extension bolted in. You have no idea how hard it was to hacksaw that off muffler right there. I sliced my hand on the extension too, because I forgot to take the burrs off with my linesmans before I installed it. Plus I broke two of my best EMT cutting blades on that sucker. I had to use the "mini" hacksaw for two of the hangars and the end of the muffler, and if you don't hold it strait it bends blades.
New muffler before I put in a horizontal support.
After adding the support. Basically where I want it to be. I had to move it over some to keep it from rubbing the brake line.
Here's that support. It's done up with #14 AWG Aluminum wire. I have about 250 feet of it, so I use it for almost everything. Since a single strand held my spare tire under my truck for a few years I trust it to hold my exhaust.
Don't ask what the lines on some of the pictures are, I don't know. Something happened when I uploaded them to my computer VIA usb cord since my card reader is missing. If I don't feel too lazy I'll redo it.
And of course, you can't forget the video. Before you say it yes I know I'm running rich, I have a bad o2 sensor. The previous owner unhooked the battery to clear the codes so I didn't find out until a few weeks after I bought it.
