• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Jacking up under rear differential?


Safety first!
50380
 
You get points for using 2 stands and lose them for how you did it.
In the late 70's we would use empty 55 gallon drums as stands to support the rear of F600 oil trucks while we rebuilt the springs and rear brakes because the shop didn't have any high stands until I took over in 82 and bought some. Nobody died, I guess we won.
 
Subtract another 1000 points. They’re Pittsburgh from Harbor Freight.
 
I’m pretty sure they’re not holding any weight... they’re just kinda balanced/ stuck under the frame.
 
In the late 70's we would use empty 55 gallon drums as stands to support the rear of F600 oil trucks while we rebuilt the springs and rear brakes because the shop didn't have any high stands until I took over in 82 and bought some. Nobody died, I guess we won.
If they were full of liquid (water or oil) I could see that being somewhat safe, essentially a hydraulic jackstand, but empty? guess you got lucky there, must have been good drums.
 
From the bible
AFC5574C-E6A2-446C-AAC7-E037ABA49054.png
 
I mean, its an 8.8. I doubt that supporting the rear of the truck would break the diff. It must be just the simple fact that it could theoretically tilt one way or another. It is not as stable as a 2 post lift.
 
Wow, No one commented. I only wrote three words on that last one…
 
That "bible's" only use is to keep people from sueing the manufacturer when the truck falls on them...
 
I'm with Dirtman on this one. There are many things from the manufacturer provided information that you shouldn't ignore or at least take into consideration. Jacking up the back of the truck from the a steel or cast iron differential isn't one of them as long as you take the precaution not to damage the cover. Working under a vehicle supported in such a way is a Darwin Award winner waiting to happen.

Also note, they are talking about replacing a tire. One would hardly need to jack up the entire rear end to change one tire.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top