installing a steering stabilizer.

[xkotyx]

mine didnt come with instructions. rather than trial and error and trying to figure it out for an hour before i actually figure how to do it, it would just be much easier and faster if anybody would know where i could find some online instructions. or if some one could tell me the mounting points on the truck for it...

any help is appreciated.

 

[alwaysFlOoReD]

I just got this b-II, didn't install anything myself. In any case, here's a pic of the stabilizer that came with it;

The one side bolts to the beam and that's kind of hidden in the pic. You can just see the aluminum L shaped bracket behind the pitman arm. The other side is supposed to be connected to the drag link with another L shaped bracket, you can see where the paint is rubbed off, close to the passenger tire.
Hope I helped,

Richard

 

[xkotyx]

I just got this b-II, didn't install anything myself. In any case, here's a pic of the stabilizer that came with it;

The one side bolts to the beam and that's kind of hidden in the pic. You can just see the aluminum L shaped bracket behind the pitman arm. The other side is supposed to be connected to the drag link with another L shaped bracket, you can see where the paint is rubbed off, close to the passenger tire.
Hope I helped,

Richard

great help! any chance you could get another pic from a better angle? if not i understand. i should be able to fill in the blanks from there.

 

[alwaysFlOoReD]

great help! any chance you could get another pic from a better angle? if not i understand. i should be able to fill in the blanks from there.

I'll try to remember next time I'm out to the shop.

Richard

 

[xkotyx]

I'll try to remember next time I'm out to the shop.

Richard

thank ya! i appreciate it

 

[alwaysFlOoReD]

Here's the pic;

Richard

 

[xkotyx]

Here's the pic;

Richard

thanks buddy! didnt realize the one bracket went onto the diff bolts.

 

[Dave g]

I just got this b-II, didn't install anything myself. In any case, here's a pic of the stabilizer that came with it;

The one side bolts to the beam and that's kind of hidden in the pic. You can just see the aluminum L shaped bracket behind the pitman arm. The other side is supposed to be connected to the drag link with another L shaped bracket, you can see where the paint is rubbed off, close to the passenger tire.
Hope I helped,

Richard

Where did you find that stabilizer at

 

[alwaysFlOoReD]

I didn't. It was already installed when I got that b2.
If you follow the guide in the tech section there is no need for one.