I need help with visor lights

[Fordisthebest30]

I have a 97 mazda b4000 4x4 lifted 2 inches with 31x10.5xr15s. I have a non-stock visor the previous owner put on and it looks cool so i thought id put on visor lights in the spockets. i went to the auto parts store and just ordered 5 spockets.
THe problem i have come up with is how do i wire this thing together? do i christmas light it together or do i have individual wires going down to one fuse? also i cant figure out a way to get the wires down to the fuse box without drilling in through the cab, which obviously is my last choice. Is there any type of advice anybody could give me?

 

[Sasquatch_Ryda]

When we do them at work, the lights are all daisy chained together with one power and ground wire that we run down underneath the windshield molding, through the inner fender and to the headlights where we splice into the park light circuit.

 

[kolton]

How is your visor mounted? If its screwed in then just drill a small hole under where the visor covers and run the wire through, then seal the hole. As sasquatch said, its all just chained together and only one wire comes down into the cab. I have mine run through the roof, down the driver side A-pillar and under the dash for the selector switch. All hidden and looks clean. And took probably 30mins to complete. PICS when your done.

 

[Fordisthebest30]

still waiting on parts but thank you . i couldn't figure out how i would do that, and i thought about the window molding but it would eventually cause a leak inside my cab, but i had a feeling i had to drill a hole in the roof. ill post pics when im finished