i know it has been asked

[stegomon]

i know it has been asked......but how about lowering a 4wd bronco 2.....not alot..only 2 inches or so...mine is just a DD and i like zooming in and out of traffic...just for better cornering.

 

[martin]

I don't think zooming and b2 belong in the same sentence, however. If you drop the front 2" I believe the axle will be on the bump stops. Might be better to widen the track a couple of inches on each side. If nothing else it would have less of a tendency to flip over.

 

[bilzy7]

Ya if you want zip, get a car. Trucks are for going through traffic, not around. And no, noones ever asked that cause noones ever wanted to lower a bronco... And live to tell about it....

 

[Surrey]

LMFAO 4x4s are not mean't to be lowered.

And a Bronco II is not meant to zip. or zoom. Or corner.

 

[Tony Raine]

a guy on B2.org lowered a 4x4 b2 i believe about 2" all around, so i know its possible.

i would convert to 2wd with a ranger crossmember and 2wd ranger beams. i plan on doing this with my "spare" b2