I-Beam Frame Brackets

[Rampager]

Are drop brackets for suspension lifts the same for 2wd and 4x4?

 

[mhuggler]

I'm wondering the same thing. The ball joint eccentrics were not enough to get my camber back where it should be. Anybody know?

 

[mp3deviant721]

Nope. Either make your own, or lessen up on the lift. But you can also spend some dough on some adjustable bushings, they can adjust camber and caster, and if you have it set just right, you will be able to get it back into spec.

 

[mhuggler]

Nope. Either make your own, or lessen up on the lift. But you can also spend some dough on some adjustable bushings, they can adjust camber and caster, and if you have it set just right, you will be able to get it back into spec.

Dang. Well, I guess I'll have to try something else, the adjustable bushings(eccentrics) didn't even come close to putting it in spec. Will any of the lift kit manufacturers sell the brackets that come in the 4 or 6 in. kits separately? If anything, I'd like to go higher.

 

[mp3deviant721]

I don't see any reason why they wouldn't sell brackets separately, just check with the company, they can point you in the correct direction. Do you also happen to have pics of you truck, I love the diesel Rangers. But haven't seen one lifted.

 

[norcals91]

If you can't manage to find a set of brackets, pm me. I have a full set (radius and beam) that has collected dust for a while in my garage. They are procomp, I had a 5" kit with them, but there is another hole for a lower spring.