• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

how to check fuel injector?


hemipower

Member
Joined
Feb 21, 2009
Messages
14
City
Kentucky
Vehicle Year
1988
Transmission
Manual
there is power to the injector but how do you see if it is squirting fuel? I used a test light to check for power should it stay on or flash?
 
Last edited:
there is power to the injector but how do you see if it is squirting fuel? I used a test light to check for power should it stay on or flash?

Is there any gas getting into the cylinder?

The injectors are batch fire on this engine, 3 fire at once, and they are grounded from 2 pins (58 & 59) on the computer to open them. They get +12v constantly. Noid light is typically used to verify the circuits are working.

You might also check the injector resistance.

Pete
 
Failing pulling the injector rail (which in turn requires pulling the
drivers side valve cover to access the screws...)

have you considered simply pulling the spark plug on the suspect cylinder
and cranking the engine?

AD
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top