Welcome Visitor! Please take a few seconds and 
treeguy
Well-Known Member
I am putting the finishing touches on re-attaching everything that came off to do my 2wd to 4wd conversion. My bro-in-laws digital camera I borrowed to take pics of hose & hose routing no longer contains the pics I need to help finish 
!! Okay its a 1990 2.9L . . . the first puzzler is the black rectangular canister that mounts behind driver side headlight . .. where does the smaller of the two holes (not the big vent holes in the middle) go to? The next one is on the air intake (left side when I am standing in front of grill) between the cylinder looking thing and the MAF sensor 
there is a tube that points down what does that thing go to??? Pics would be a huge plus 
. . . but not required . . . 
Now for the dumb question . . . I neglected to note how the ground cable was attached (ahem I disassembled about 6 months ago) can't recall the location . . . ??!!
!! Okay its a 1990 2.9L . . . the first puzzler is the black rectangular canister that mounts behind driver side headlight . .. where does the smaller of the two holes (not the big vent holes in the middle) go to? The next one is on the air intake (left side when I am standing in front of grill) between the cylinder looking thing and the MAF sensor there is a tube that points down what does that thing go to??? Pics would be a huge plus . . . but not required . . . Now for the dumb question . . . I neglected to note how the ground cable was attached (ahem I disassembled about 6 months ago) can't recall the location . . . ??!!
Last edited:
