HI!

[furia01]

Hello my name is luis, I'm from Argentina, I have a jeep with a peugeot engine, but is very small (1600 cc) 1.6 l.
recently bought a ford cologne 2.8 v6 and I put on my jeep. Here I give you some pictures of my jeep and engine.
here in Argentina there are not many parts for these engines I would like to know if I could buy parts in the United States.
If someone speaks Spanish; better!!.. jajajaj greetings from Pergamino, Buenos Aires, Argentina.





Uploaded with ImageShack.us




Uploaded with ImageShack.us




Uploaded with ImageShack.us




Uploaded with ImageShack.us

 

[Mac]

Well Welcome! Kind of a different rig/truck you got there. I'm sure someone here can help out with any questions and suggestions on who does ship down your way.
Dave

 

[Quartermile]

That thing looks like a beast! sweeeet

 

[bcost882]

now that is a jeep right there......holy crap. i know jeep guys up here that would crap their pants to get that thing.

 

[furia01]

v6 cologne.

Hi guys, sorry if my English is not very good, thank you very much for without opposition in the forum, I would like to know who might contact to obtain information from some parts of my cologne v6, as by putting it in my jeep, I would rebuild it.
thank you very much,
Luis.

 

[kimcrwbr1]

Hi welcome what year is the engine you could possibly find a parts rig 1983-84-85 Bronco II and Ranger 4X4 came with the 2.8. As far as new parts go some E-bay sellers ship international also just get the part numbers and do a search. If it is a 70s engine pinto and mustang II had thos engines also. The way to tell is look at the part number the first two digits tell the year if it begins with a D it is a 70s and E is 80s so if the block has the part number D7eb-oooo the first two are the year or 1977 E3eb-ooo would be a 1983. Sounds like a nice build did you get the engine to bolt up ok you should have plenty of power.

 

[furia01]

hello people! I'm back, check my engine block and found the numbers, I take pictures to pc. I see them is from the 80s, here are the pics.



Uploaded with ImageShack.us





Uploaded with ImageShack.us





Uploaded with ImageShack.us


what r nesesito to rebuild, are rod bearings and bench, a pistons, pins and rings, valves and gaskets.

 

[furia01]

hello good morning! Need to Know if I can go home addresses of some parts ford cologne 2.8 V6 engine (pistons, rings, bearings, valves ... etc)
I will appreciate your help.
luis greets from Buenos Aires Argentina