Heater inop! But with 12 powers supply it works!

[Xploda]

Ok I removed the ac in my 92 xploda and now my heat is on randomly and only on high. Is there somthin to do with me removing the ac or should I be looking more so at the resistors for the variable speeds? Any insight would be helpful thanks..and oh ya whats a good way to patch a brass sending unit float lol thanks

 

[Xploda]

I used some permatex cold weld stuff says it impervious to gas so I hope it works lol

 

[dusto2]

more than likely its the resistor, under the hood in the evap/heater box

 

[Xploda]

Cool kinda what I was thinking. so its inside huh or just attached on the outside I remember seeing a plug on the outside of the box. thanks for the reply btw

 

[Sasquatch_Ryda]

Yea if it only works on high its a pretty good inclination that its the resistor.

 

[Xploda]

ya checked the res today and it looked damn near new jumped the relay and bam it works. no broken coils or anything on the res tho I was hopin it was that but when I put the new relay in now it works only on high still it started to become intermitant last night then stopped this morning. wierd I the relay was toast cause u could hear bunch of stuff on the inside shakin lol. And to make the day way better I got my ext shackles on in 20 mins lol used my dad in laws airplane jacks to lifted the frame and shizam done lol thanks for the help btw I really apreciate it but its still only high so maybe its just correded wires I didnt get the chance to take apart the connector will tmrw back at it again >< now for the lock right lol

 

[Mark_88]

You can get them at the junkyard real cheap...unless you prefer to pay an outrageous price for a new one...but they are a ten minute job to replace either way...I finally found the pic of mine...got it out of an F150...wire colors are different, but same basic functions...

 

[Xploda]

ya I had it out already but it looked new couldnt even justify on even gettin a new one tested for breaks in the coils and nada only thing would it possibly me is maybe the thermal switch or w/e I think not sure. But ya maybe Ill just swipe one from a junkyard and try it anyway lol thanks!