had a little to much fun

[scheff]

well guys i had to much fun last night and borke to much. i was going down a back road and seen a trail and went down in...... now i have 4 borke cab mounts 2 mounts for the core suport and the core suport. trans only goes up to 4 gear i made a round rim flat on one side and destroyed 1 31in bfg all trerrian the cab shifted forward and hit the motar and i have a mess. the truck still runs and drive great i need stuff if anyont has any extra ill post pics later on tonight

 

[feellnfroggy]

Damn what did you jump?

 

[Psychopete]

my guess is a stump or just the right rock got caught on the cross member, or something that's part of the frame. Maybe a tree right on the frame horn, but you'd have to hit it pretty strait on. lol

 

[PanamaExpat]

Was that fun lubricated with a bit of adult beverage? That's usually when I BORKE my ride. LOL

 

[scheff]

lol i had a shot of apple pie when i went down the trail i made it almost 1/2 way down and got stuck it took me about a hour to get unstuck because i went buy my self like a idiot. i got unstuck and got into a farms feild got going a little fast and decided to get back on the trail. when i did that i was not paying atention to my speed and hit a BIG hole thats sent the truck in the air for a few seconds. i came down into a bigger hole that messed everything up. i was not trying to brake anything or even get stuck my 4x4 dosent even work. i was just being a stupid 18 year old lol

 

[scheff]

one cab mount is gone the other ones have been ripped through. the bed and cab hit each other. fenders got a rinkle in them now from it sliding forward. the pic of the full truck is how it is looking after i have pulled it back some. there is still a big gap between the bed and cab but not as bad as it was. i belive i have pics for all the damage.... just walked outside and it looks like my power stearing pump is leaking now lol the only thing i am upset about is that i messed up the rim amd tire.... the wheals on the back of the truck now are my 33 but i cant fit them in the front i need to lift my truck it is 100% stock

 

[PanamaExpat]

Yup the rim and tire are a bummer for sure. Looks like you need a bit of welding a bushing kit and a few bolts to fix the cab problem. You can probably bang that corner out without too much trouble. From the looks of those rear wheel wells you could have used a new bed anyhow. Is the power steering a hose or a seal?

Well at least now you have an excuse to tear it all dowm and do a real build on it.
Kee`p us up to date on your progress.

 

[LIMA BEAN]

Why not just start the night off by driving off a cliff? Be alot less damage and you get that that funny "Im inna elevator feeling in your pants".

 

[scheff]

the power stearing is comming out of the pump im thinking it is a seal i just put new hoses on it. i do neew a new bed iv been looking but nothing has came up that is worth getting. i have found a ranger that is just cab forward that is veary clean i am trying to get. it dont have a moter or trans or the bed but everything else is there. i am thinking about taking everything off of it and putting on mine. now my dd truck is a project that wasnt planned but o well needed something to do anyways

 

[upnsmoke]

Why not just start the night off by driving off a cliff? Be alot less damage and you get that that funny "Im inna elevator feeling in your pants".

Said feeling in pants should be achievable without killing a truck each time, I hope.

 

[Jraymer360]

those Monroe country roads can sure mess up a truck!

 

[PlumCrazy]

Yup the rim and tire are a bummer for sure. Looks like you need a bit of welding a bushing kit and a few bolts to fix the cab problem. You can probably bang that corner out without too much trouble. From the looks of those rear wheel wells you could have used a new bed anyhow. Is the power steering a hose or a seal?

Well at least now you have an excuse to tear it all dowm and do a real build on it.
Kee`p us up to date on your progress.

You can't fix stupid with a wrench though.

-PlumCrazy

 

[97RangerXLT]

You can't fix stupid with a wrench though.

-PlumCrazy

I disagree. It all depends on how big the wrench is and how hard you hit stupid with it

Sent from the Galaxy to the interwebs

 

[sloth69mustang]

You can't fix stupid with a wrench though.

-PlumCrazy

+1

 

[97RangerXLT]

As for the original poster keep us updated with pics of the repair. Glad you werent hurt.

Sent from the Galaxy to the interwebs