Getting back in a ranger, parts needed. Blah blah blah

[7.5L_STX]

Should be in parts wanted but nobody goes on there, so here it is.

Gonna sell the Chevy and get behind the wheel of a ranger again, picked up an 88 2wd extended cab for 200 bucks. Has the 2.9 and automatic, its remarkably solid for the age and area it came from, the only problem is it had a harness fire so I need a new under hood wiring harness and a master cylinder.

Any help would be appreciated!!

Sent from my DROID RAZR using Xparent Red Tapatalk 2

 

[7.5L_STX]

Bumpity bump, somebody's gotta have a wiring harness!

Sent from my DROID RAZR using Xparent Red Tapatalk 2

 

[bobbywalter]

what do you need specifically?



you still have your bigblock truck?

 

[7.5L_STX]

Yah I still got the old beast. Waiting on my financial situation to get just a little bit better before I finish that one up. Its getting close though!

Specifically I need the complete under hood harness for a first gen 2wd 2.9 with the auto. Most of its fried.

Sent from my DROID RAZR using Xparent Red Tapatalk 2

 

[7.5L_STX]

For 200 bucks I couldn't go wrong

 

[bobbywalter]

you need the sensor package too?



should not be too hard to do.

 

[bobbywalter]

figured you could use the setup off of the big block truck

 

[wildbill23c]

I have an LMC truck catalog that has complete wiring harnesses for like $700, pretty pricey, but its all connected already just have to plug stuff in and install the fuse box. Check on the LMC truck website.

 

[7.5L_STX]

figured you could use the setup off of the big block truck

I thought of that, but most of that harness is already long gone. Wish i woulda kept it, never thought i would have a 2.9 again though lol.

I have an LMC truck catalog that has complete wiring harnesses for like $700, pretty pricey, but its all connected already just have to plug stuff in and install the fuse box. Check on the LMC truck website.

That's way to steep for a budget DD haha. good call though, I didn't think LMC carried complete harnesses.



Sent from my DROID RAZR using Xparent Red Tapatalk 2

 

[wildbill23c]

I thought of that, but most of that harness is already long gone. Wish i woulda kept it, never thought i would have a 2.9 again though lol.







That's way to steep for a budget DD haha. good call though, I didn't think LMC carried complete harnesses.



Sent from my DROID RAZR using Xparent Red Tapatalk 2

Yep, completely understand the budget problem. Which is why my B2 is still leaking oil like a colender, and still has POS tires and non-matching wheels.

Best bet is the junk yard, its gonna take a lot of time to get the harness taken out, but that would be the cheapest.

 

[adsm08]

I just pulled an MT harness out of my Ranger. It is more or less for an 88. Well, it came out of an 88. It is missing some plugs that I needed, but it's mostly there.

You want it, send me $15 for shipping and an address to send it to.

 

[7.5L_STX]

I just pulled an MT harness out of my Ranger. It is more or less for an 88. Well, it came out of an 88. It is missing some plugs that I needed, but it's mostly there.

You want it, send me $15 for shipping and an address to send it to.

Sweeeet! Its greatly appreciated!
You got PayPal?

Sent from my DROID RAZR using Xparent Red Tapatalk 2

 

[bobbywalter]

well locally here he wants 70 bux without a pcm




in detroit i get them for 26-40 generally...pcm go 26-100 generally.


so you got as good a deal as it gets here.