Ford Ranger OEM bed liner-PLZ HELP

[iburnett6115]

I’m new to this forum, basically I was rolling down the highway at like 70-80 mph and I look up in the rear view and to my surprise I see my bed liner lift up and fly right out of my truck bed I turned around to take a look but the liner was ripped apart and basically destroyed. I loved that bed liner it had multiple 2x4 slots running across the bed so you can put a piece of plywood in there, I’m looking to find another but I cannot find that particular liner anywhere plzzz if anyone knows where to find these liners

 

[Dirtman]

I have never seen a bedliner like that before. My factory Ford bedliner tucks under the rails and only has two 2x4 slots.

 

[iburnett6115]

the one that used to be on my truck was the only one I’ve seen before I didn’t have any good pictures so I had to do some intense digging online to find this picture I’ve got a 2011 ranger inherited from my grandfather, he used to have a 99 ranger with the same liner and when he got a new truck he transferred it. Maybe it’s an older model I have no idea

 

[Uncle Gump]

With the Ford logo on the liner... I would say it's a Ford Liner.

 

[iburnett6115]

Well yes that much I figured but cannot find this on any oem Ford sites or anything

 

[Uncle Gump]

Junk yard... craiglist... face book...

They pop up when you least expect it.

 

[19Walt93]

My friend has 6 new Ford Duraliner under the rail 7 ' bedliners in Enfield, NH.

 

[Alan_nc]

Funny how different folks feel differently about things. As soon as I got my truck home I took the bed liner out, cut it up into pieces and put it in the trash. Just me, but I have always found that items put in the bed slide around to much on a bed liner.

You should be able to find one in the junk yard. They are pretty sturdy and definitely don't rust.

 

[Roert42]

Funny how different folks feel differently about things. As soon as I got my truck home I took the bed liner out, cut it up into pieces and put it in the trash. Just me, but I have always found that items put in the bed slide around to much on a bed liner.

You should be able to find one in the junk yard. They are pretty sturdy and definitely don't rust.

I agree stuff slides around too much, water gets trapped underneath, hard to get the dirt out with the grooves.

the only thing I like is the slot for the board at the end. I wish they would add one of them to the stamping of the bed.

 

[Alan_nc]

Interesting you mention the slots built into the bed. My truck prior to the Ranger was a Frontier and they have slots for 2 x 4s.

 

[Dirtman]

I love mine. Yes stuff slides around but on the flip side it's been in there for 12 years and when I took it out to check underneath, the bed looked like it just rolled off the assembly line. So, it does it's job...

 

[racsan]

I kept the bedliner from my ‘93 supercab, and suprizingly every ranger since then has been a reg cab longbed. Ive yet to run across a used 7’ bedliner, found several 6’, one was even a free for the taking. I’ll just keep watching, I have found (2) 7’ caps that way.

 

[HenryMac]

I’m new to this forum, basically I was rolling down the highway at like 70-80 mph and I look up in the rear view and to my surprise I see my bed liner lift up and fly right out of my truck bed I turned around to take a look but the liner was ripped apart and basically destroyed. I loved that bed liner it had multiple 2x4 slots running across the bed so you can put a piece of plywood in there, I’m looking to find another but I cannot find that particular liner anywhere plzzz if anyone knows where to find these liners View attachment 53212

That is a well designed bedliner. Seems like Ford gets a great idea... then abandons it?

Ford still sells them for a 2011. It's not identical to yours... but check it out.

Bedliner - Styleside 7.0 Over-the-Rail

 

[xleafr]

I came across this post while looking for the Ford OEM over-the-rail bed liner with the 2x4 slots. I had this in my old 2005 Ranger and it was awesome. I just bought a 2003, but sadly it didn't come with the bed liner. In case anyone else comes across this thread while searching, I finally found some ford OEM bed liners for older rangers here: https://www.discountfordpartsfromsoundford.net/searchresults.asp?Search=ranger bed liner&Submit=

 

[Lefty]

That was a nice bedliner! I chose to do something entirely different. My bed had a hole so I put in a wooden bed instead. It cost about a hundred bucks. It was mostly done at the time of this photo. At least it won't blow away. Just a thought.