Ford BBAS link

[alwaysFlOoReD]

Here is Fords Body Builders Advisory Service, which has the 2019 Ranger link to dimensions and layout in a PDF format;

https://fordbbas.com/publications

And a direct link to the PDF download;

https://madocumentupload.marketinga...af95d28a009c6bcb1651275208a695506000&v5=False

RANGER
MODEL LINEUP
DIMENSIONAL DATA
SUPER CAB / CREW CAB
PICKUP BOX
SUPER CAB BOX DELETE
AXLE / TIRE / VEHICLE HEIGHT DATA
SUPER CAB BOX DELETE FUEL FILLER PIPE INSTALLATION
CHASSIS CAB / PICKUP BOX DELETE FRAME DATA
WHEEL & TIRE DATA
FRONT SURFACE AREA WORKSHEET
SEAT TRACK & H-POINT DATA
PICKUP BOX DELETE MAXIMUM UNLOADED VEHICLE WEIGHT
(UVW)
ELECTRICAL WIRING
CHMSL CIRCUIT
BOX DELETE TAIL LAMP

 

[Jim Oaks]

Thanks!

 

[don4331]

Thanks alwaysFlOoRed:

That doc provides a couple tidbits of information:

The wheels are 6 x 5.5; just different than the F-150's 6x135 that you can't swap/use F-150 aftermarket wheels.

And the interesting one for 85_Ranger4x4 and myself - the frame appears to be 3 pieces - front, rear and filler...

Which makes sense if you are using same frame for Ranger and Bronco II - you just shorten the filler/driveshaft/wiring...

But it also leaves door open for either SCab with 5' or 7' bed* or SCrew with 6' or 7' bed by just changing the length of the filler/driveshaft/wiring. (I'll need some better reconnaissance on whether the rear frame is different between SCab and SCrew).

I wonder how pi$$ed the wife will be if I cut the frame the 1st week I have a new truck?

*7' bed would need to be imported from overseas but not impossible.

 

[bobbywalter]

I wonder how pi$$ed the wife will be if I cut the frame the 1st week I have a new truck?

*7' bed would need to be imported from overseas but not impossible.

mine already gave me permission....



who knew...