factory lift

[BARanger]

i have a 96 ranger 3.0 4x4 it has the factory lift 2 inch blocks in the rear but
the truck dips in the front like my other ranger with out the lift is the front the same or does it already have a 2 inch lift as well. would i be able to add 2 inch lift in front and still be able to adjust for camber.

 

[Sasquatch_Ryda]

The 2" block is factory for 4x4 trucks, its not a lift block. It's also got a the bump stop built into it. You can throw a 1.5" spacer up front to level it out tho, you will need an alignment afterwards tho.

 

[whitebassbenny]

just did a leveling kit in mine and here is how it came out.
I did 1.5" rough country coils with skyjacker shocks.

http://www.therangerstation.com/forums/showthread.php?t=19189

 

[BARanger]

what was used to lift the front does it have the 2 inch drop brakets

 

[Sasquatch_Ryda]

You don't need drop bracketry for 2" of lift, it will still be alignable with the right camber/caster adjusters.

 

[BARanger]

want is the differance between the skyjacker sja-132 and sla-132x springs whitch ones
would be the best for some off roading and a lot of street driving which one would give the better ride

 

[4x4junkie]

If you have a Supercab, get the 132X.