Extended RA's and Tranny Crossmember

[PlumCrazy]

This the setup I just made for Ranger44

All the tube is 2x2 1/4" wall. And all the plate is 1/4", except the part where the bushing goes through which is 1/2". The arms are 13.5" over stock.

Here is what they look like on my truck

-PlumCrazy

 

[crawlin91]

 

[Ranger44]

I'm sure liking them

I can't wait to have them on my truck and putting them to good use!

Thanks again.

 

[4x4junkie]

Looks good

I see you had to battle some pretty good rust on those arms.

 

[Boggin]

this pic will never get old!

 

[Ranger44]

Looks good

I see you had to battle some pretty good rust on those arms.

Yeah....that's Illinois winters for ya. Winter is a "salt fest" here.

Sad thing is, those are in good shape compared to others I've seen.

 

[Sasquatch_Ryda]

What kind of caster are you building into them (if any)?

 

[PlumCrazy]

What kind of caster are you building into them (if any)?

I dont remember the exact degrees, but they are within stock spec with 5"-6" coils, You can see the gussets on the back side are different sizes. I built these ones useing my old ones a a template, so I am sure of the exact angle. The first mounts I made were too tight to the frame and messed with the caster, so I redesigned them to lower the arms a little and now they are perfect.

I built the original brackets to work with 4" coils, but I ended up running 6". Here are my orginal brackets, notice how the bottom is square verses the new brackets that are angled down a squeak.

-PlumCrazy

 

[spdcrazy]

wow. looks good. and i like the look of square tubing instead of round for the RA!

is this something you are making and selling?

 

[r1hatman]

Looks good! I like that tailgate too. What kind of tires are those?

 

[spdcrazy]

Looks good! I like that tailgate too. What kind of tires are those?

those tires are most def the BFG all terrains! love them

 

[PlumCrazy]

wow. looks good. and i like the look of square tubing instead of round for the RA!

is this something you are making and selling?

Yes.

120 + Core for extended RA's. 100 for the mounts/cross member.

They come with all the hardware except bushings.

Prices do NOT include shipping.

-PlumCrazy

 

[PlumCrazy]

those tires are most def the BFG all terrains! love them

Yup. Good Ole 33" BFG KO's.

-PlumCrazy

 

[Ranger#1]

This the setup I just made for Ranger44

All the tube is 2x2 1/4" wall. And all the plate is 1/4", except the part where the bushing goes through which is 1/2". The arms are 13.5" over stock.

Here is what they look like on my truck



-PlumCrazy

 

[PlumCrazy]

?