- Joined
- Jan 11, 2009
- Messages
- 104
- Points
- 3,101
- City
- Kelowna, BC
- Vehicle Year
- 1986
- Transmission
- Automatic
Is there any way of testing a EVR valve? I've got a Clymer manual and I couldn't see anything about doing it.
EVR valve
- Thread starter JTH1972
- Start date
Check out http://www.fordfuelinjection.com They have enough info on there to keep you busy for a while.
Pete
- Joined
- Aug 6, 2007
- Messages
- 6,937
- Points
- 3,101
- Age
- 40
- City
- Westport, WA
- Vehicle Year
- 1993
- Transmission
- Manual
with the engine running, pull the vacuum line off the EGR valve and apply vacuum to the valve with a hand pump. the truck should run very poorly and/or stall with vacuum applied to the valve.
- Joined
- Jan 11, 2009
- Messages
- 104
- Points
- 3,101
- City
- Kelowna, BC
- Vehicle Year
- 1986
- Transmission
- Automatic
I'm looking to test the EVR, not the EGR. However, thanks for the info. That will help me figure out if it is my EGR or EVR that's causing the code.
- Joined
- Aug 6, 2007
- Messages
- 6,937
- Points
- 3,101
- Age
- 40
- City
- Westport, WA
- Vehicle Year
- 1993
- Transmission
- Manual
whoops! i shouldnt skim so fast when i read 
a continuity test on the EVR would probably suffice. you could also power it up and make sure it opens (open with voltage, closed without).
a continuity test on the EVR would probably suffice. you could also power it up and make sure it opens (open with voltage, closed without).
Sponsored Ad
TRS Events & Gatherings
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
