efi 5.0 swap help needed...

[mustangpro69]

i am swapping a 87 mustang speed density engine and harness into a 93 ranger splash 2wd.....i have everything needed to do the swap and if i dont i can get it easily, anyways back to topic....i basically figured out how to wire everything up except the fuel pump.....any help would be greatly appreciated....I was also wondering if anyone has done this swap in particular.....so if they have any pointer send them my way, thanks

 

[Teddyzee]

Mustang pin 22 (Fuel pump, T/Lg) to Ranger fuel pump relay/inertia switch. For my '97, this is pin 5 of the Ranger 42 pin connector, Dg/Y.

My '93 wiring diagram says this circuit is Dg/Y as well, coming from pin8 of the Ranger ECU. You should be able to find this in your 42-pin connector. I'd start at pin 5

This setup works perfect, pump primes and stops, just like stock.

 

[mustangpro69]

man that helps alot....thanks i really appreciate it.......i will let you guys know how this ranger turns out......