early bronco SAS parts and questions

[bert296]

im thinking of putting a dana 44 early bronco axle in my ranger. im just wondering what ill need so i can get all the parts together before i start. i've read all the stuff in the tech library, and the one on the B2 he put 3.5 inch EB lift springs in and it made the rig 4 inches taller than the 4 inch lift that was already in it. so do the 3.5 EB coils make roughly an 8 inch lift?? what coils should i use to achieve roughly 4 inches of lift from a stock ranger??

where can i get a trac bar mount?
radius arms out of a 77 or 78 f-150 are those the stock ones?
knuckles out to get disc brakes out of what years will fit?

thanks for all your in put

 

[scooter]

im thinking of putting a dana 44 early bronco axle in my ranger. im just wondering what ill need so i can get all the parts together before i start. i've read all the stuff in the tech library, and the one on the B2 he put 3.5 inch EB lift springs in and it made the rig 4 inches taller than the 4 inch lift that was already in it. so do the 3.5 EB coils make roughly an 8 inch lift?? what coils should i use to achieve roughly 4 inches of lift from a stock ranger??

where can i get a trac bar mount?
radius arms out of a 77 or 78 f-150 are those the stock ones?
knuckles out to get disc brakes out of what years will fit?

thanks for all your in put

Do a lil searching. Its been done 100+ times.


Here is EVERY d-44 thing you could ever need to know.
http://77cj.littlekeylime.com/Dana44_3.htm

http://77cj.littlekeylime.com/Dana44.htm

Look at built threads, i did it, and my build thread is here as are MANY others.