driver side front suspension is messed up

[parson2008]

i recently hit a curb head on doin 50mph and jumped through a huge ditch, but anyways i bent a radious arm on my driver side front, i replaced it with a new one and my camber was off so i adjusted it, maxed it out on the adjustment bolt and still cnt get the tire to sit straight, any ideas?

 

[mwood1985]

probably bent the frame quite a bit with a jump like that. its never gonna be 100% again but you might have a collision shop take a look at it and see if the frame bent too

 

[parson2008]

figured it out, when i put the spring back in i didn't have the spring turned quite right, i spun it 180 degrees and now its fine. frame is straight as an arrow and solid