Drag link options for D30 SAS

[PlumCrazy]

Nearing the end of a D30 SAS and one of my last unkowns is what to use for a drag link. I didnt get one with the axle unfortunately, so I have no idea how long or what size threads are on the 90s YJs.

Prefer not to go heims and I dont need some crazy 1 ton TRE setup for this beater 2.3 truck.

 

[dvdswan]

Are you going to have it go to the steering knuckle or to the tie rod? If you have provisions to go to the steering knuckle, just measure from the knuckle to the steering pitman arm. You could purchase a stock jeep drag link and find out what size your pitman arm is and buy swap it the end.

 

[PlumCrazy]

Are you going to have it go to the steering knuckle or to the tie rod? If you have provisions to go to the steering knuckle, just measure from the knuckle to the steering pitman arm. You could purchase a stock jeep drag link and find out what size your pitman arm is and buy swap it the end.

It's a SUA and Y's into the factory YJ tireod

 

[Curious Hound]

Prefer not to go heims and I dont need some crazy 1 ton TRE setup for this beater 2.3 truck.

Well, in that case, broom handle and superglue.