Dana 50 ifs from F250

[wrecking-crew]

Would I be able to make it work on the rear of a Ranger?

 

[disciplerocks]

Anything can fit

 

[odie1969]

Sure with money and time. If you do this I want lots of pics.

 

[MountainMike]

Sure with money and time. If you do this I want lots of pics.

^That^

 

[Toreadorranger]

http://www.pirate4x4.com/forum/showthread.php?t=829346

Read that. Then do the same thing but in the back.

 

[Snoranger]

I dont see why not:

http://img99.imageshack.us/img99/6707/imgp0487rd7.jpg

 

[KLAKEBRONCO]

The best way is like the guy in the Pirate thread, but with a modified D44 beam....D44 beam with the outer C section from a D50 welded on. The passenger D50 and D44 beams are basically the same length, but the drivers D50 beam is much shorter than the D44.

I'm working on something similar as in the Pirate link, but using a D44 drivers beam, a cut/turn, and I'm going to work on getting a 35 spline carrier in the D50 center section.

 

[Snoranger]

The best way is like the guy in the Pirate thread, but with a modified D44 beam....D44 beam with the outer C section from a D50 welded on. The passenger D50 and D44 beams are basically the same length, but the drivers D50 beam is much shorter than the D44.

I'm working on something similar as in the Pirate link, but using a D44 drivers beam, a cut/turn, and I'm going to work on getting a 35 spline carrier in the D50 center section.

I saw your thread over on FSB. I'd like to see how it turns out. I've been thinking about a D44/50 hybrid rear for my Ex for the past few years.

 

[gwaii]

I dont see why not:

http://img99.imageshack.us/img99/6707/imgp0487rd7.jpg

hey....that's mine!

 

[Snoranger]

hey....that's mine!

I though so, That looks like 1 of your "creations" . You may want to chime in here then:

http://fullsizebronco.com/forum/showthread.php?t=182695

 

[gwaii]

I though so, That looks like 1 of your "creations" . You may want to chime in here then:

http://fullsizebronco.com/forum/showthread.php?t=182695

holy crap

that site is so full of ad's it's hard to keep track of what you are reading(i did find the part about photoshopping the pic funny,though.i just figured out a little while ago that the 'enter' button drops the line down



like this-thats my computer skill level)

 

[Toreadorranger]

The best way is like the guy in the Pirate thread, but with a modified D44 beam....D44 beam with the outer C section from a D50 welded on. The passenger D50 and D44 beams are basically the same length, but the drivers D50 beam is much shorter than the D44.

I'm working on something similar as in the Pirate link, but using a D44 drivers beam, a cut/turn, and I'm going to work on getting a 35 spline carrier in the D50 center section.

From reading in that jeep thread it seems they are close in length just the mounting points are different which is why people think it is so much shorter.

 

[MountainMike]

hey....that's mine!

Seriously Tom? I need to go visit you ASAP. You have got some wicked creations!

 

[gwaii]

Seriously Tom? I need to go visit you ASAP. You have got some wicked creations!

ya,that one don't exist anymore,though.i was building it when i was in mission,it was going to cost too much to bring up to the islands so scuttled it.

can't have this type of info getting into enemy hands

 

[COPPERHEAD85]

hey....that's mine!

That sir is no surprise!