D44

[Rulebreaker]

I need the spindals out for my 79 HP44 and I was wondering if a TTB44 is the same from the spindal out. It would be allot easier to find parts off a TTB than a solid axle where I'm at. RB

 

[Rulebreaker]

778-79 spindle
http://broncograveyard.com/bronco/i-22140_spindle__dana_44___ton.htm
80-92 spindle
http://broncograveyard.com/bronco/i-32080_oem_d44_spindle__1980-92.htm

The part#'s are different but they look identical. Someone must know. I can buy a TTB44 80's truck real cheap but there is no sense doing it if it wont work. RB

 

[Bent Bolt]

Don't quote me on this but I think they are the same. I do believe 70's F-150 brake rotor is the same as the 80's TTB brake rotor less the ABS of course.

 

[Mutant Pony]

The '79 straight axle spindle has a large 5 bolt pattern. The TTb has a smaller 6 bolt pattern.
The spindles you need are unique to that knuckle. "76-'79 f-150 and Bronco.
I have at least one but, I don't know the condition. I'll have to tear it apart to see. Let me know.

 

[Rulebreaker]

The '79 straight axle spindle has a large 5 bolt pattern. The TTb has a smaller 6 bolt pattern.
The spindles you need are unique to that knuckle. "76-'79 f-150 and Bronco.
I have at least one but, I don't know the condition. I'll have to tear it apart to see. Let me know.

I need Everything from the spindle out so anything I can find will be great. So are the bearings, hub, rotor, lockout, and stub shaft the same? RB