Cross Member Bolts

[Twister]

I am going to be pulling a manual transmission tomorrow and i need to know the size of the transmission cross member bolts.

Thanks

 

[lethal-threat-b288]

the head or the actuL size of the bolt itself, socket on mine was 18mm nut too! The bolt is I think 7/16x6" not sure. Measure it and if In doubt go to your local hardware store and they can tell you what it is!

 

[Twister]

the head or the actuL size of the bolt itself, socket on mine was 18mm nut too! The bolt is I think 7/16x6" not sure. Measure it and if In doubt go to your local hardware store and they can tell you what it is!

My bad, i meant the size of the head of the bolt and the nut.

 

[rboyer]

Use an 18mm deep-well socket. Just keep in mind that the size of the head of the bolt CAN be different if the transmission was ever changed and someone replaced a bolt.