erok81
New Member
- Joined
- Sep 3, 2009
- Messages
- 2
- Vehicle Year
- 2001
- Transmission
- Manual
So there are about five different sections I could have put this in, so if I chose incorrectly I apologize.
I have a 2001 Mazda b2500 that I am going to convert to 4wd. The suspension, axles, etc I can do no problem - my question is about transmissions and transfer cases. I was originally just going to throw a divorced case on, but would rather keep it all as one unit.
Is there a transmission/t-case combo that will bolt up to my current engine/bell housing? Most of the stuff I see on here involve egine swaps as well, but I'd like to keep my 4cyl.
I'd like to stick with a manual transmission if possible.
So is there anything out there that will work?
I have a 2001 Mazda b2500 that I am going to convert to 4wd. The suspension, axles, etc I can do no problem - my question is about transmissions and transfer cases. I was originally just going to throw a divorced case on, but would rather keep it all as one unit.
Is there a transmission/t-case combo that will bolt up to my current engine/bell housing? Most of the stuff I see on here involve egine swaps as well, but I'd like to keep my 4cyl.
I'd like to stick with a manual transmission if possible.
So is there anything out there that will work?