computer help 86 ranger

[tommy182018]

i got an 86 ranger i looked at the code on the computer it dont match the one on the plug and all the wires dont line up i looked at part stores and no one can find any info on the codes for which computer i need do any of you have any help the computer i have is code number e4Lb-14a459-b the one the plug said i need is e4Lb-14a468-a it dont run it has no injector pulse the timing is right and it has a new hall effect and new controll modual i know it is the computer send me a message or email me tommy182018@hotmail.com

 

[Psychopete]

I am having trouble understanding what you're talking about.

The 60 pin connector for the PCM is used in a lot of applications. The '90 Cali. emissions PCM hooked right into my '88, no problem.

All you need to do is go to a junk yard and get a PCM for an '86 that matches your transmission. Cardone sells refurb PCMs as well, there's tons of places you can locate one.

Are you sure what you think is the computer is the computer? It's located under the passenger side kick panel.

Pete

 

[tommy182018]

yes i am sure that is were i pulled it and you have wires going to the connector but when you pull it out the computer dont have a pin were most of the wires go

 

[Psychopete]

yes i am sure that is were i pulled it and you have wires going to the connector but when you pull it out the computer dont have a pin were most of the wires go

Not every single pin is used on the harness, but did some of the pins somehow break off into the connector?

Pete

 

[Flat Toy]

I would go to www.fordfuelinjection.com and look at the diagrammes there of the 60 pin plug on the computer. It also has a chart telling what the pins are for and what kind of readings you should have when tested with a meter.