• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Code 41 and 88. what do they mean?


a-5 freak

Well-Known Member
Joined
Jan 5, 2009
Messages
1,129
City
Titusville, FL
Vehicle Year
1991
Transmission
Manual
i got a code 41 and a 88 while doing a diagnostic using the CEL. I HAVE checked the tech library and code 41 does not apply to the cel test and 88 is a combination of like 5 different things.
 
how does 41 not apply to a self test? the truck either is or was at some point running lean.

for code 88, you dont have a choke or carb...so we can rule out choke relay or throttle kicker. rangers dont have e-fans so its not that. so its either a transmission code or a spout connector code. if you have a 5 speed then that narrows that down.
 
The diagnostic codes can vary somewhat according to year, and driveline application. This has tripped me up before.

I've got the Ford 1991 Engine/Emissions Diagnostic manual; for the truck 2.3L engine it lists a code 88 as "Loss of Dual Plug Input control". And, it does list the code 41 as "HEGO sensor circuit indicates system lean".

The 88 is shown as a continuous memory code (KOEO), and 41 as an engine running code (KOER).

Hope this helps, and good luck.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top