Choke

[Twister]

Ok so i have done the duraspark setup. Got it running and got it timed right. I am fideling with the carb now. I have a Motorcraft 2100 from a 64-65 mustang on it. As of now my choke is held wide open with an electric choke from one of the 3 2150's i have laying around.

My question is, how do i get the electric choke to hook up right? Will the 2150 electric choke work on my 2100? Do i have to change anything else on the carb other than the little circle choke housing?

This is what my carb looks like.

 

[Big Jim M]

In your photo the choke is CLOSED not wide open. It needs to be installed to see what it does right or wrong.
Big JIm

 

[Twister]

That is not my actual carb, that photo was just to show you what my carb is. The choke is turned all the way towards the front so that that choke is wide open. I can take a pic of my actual carb if needed?

I was asking how i hook it up properly.

 

[dangerranger83]

I would do a manual choke set up, much easier and you control every aspect of it.