• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

check engine light need help.


RangerMan9389

Well-Known Member
Joined
Oct 18, 2007
Messages
45
Age
36
City
Flat Rock Michigan
Vehicle Year
1989
Transmission
Manual
well i have an 89 2.3 4x4 manual everything. driving down the high way and the cel came on for about 5 minutes and turned off. got home poked my head under the hood and i can't see anything obvious. left to go to home depot and about a mile on my way it came back on and went off again in about 5 minutes and the same again on the way back. i just changed the 02 sensor about 1 week ago. i checked the connector and it was fine and i am about to do a pcv vale real soon.

dose anyone have any idea other than going and getting my codes pulled? or has anyone had this happen and or what did it turn out to be your problem?


thanks Jeremy
 
Ideas without knowing what the computer is seeing are going to throw you down the wrong direction. You can pull the codes out of the computer with a metal paperclip or other jumper wire. There is nothing to it. The process is documented in an article in the 'Technical Libary' here at TRS. Post the KOEO codes you're getting here and we can give you some ideas.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top