Can't open airbox

[cubewhiz]

One screw comes out fine, but the other just spins in place. Any ideas how to get it out?

Thanks.

 

[88_Eddie]

a magnet

 

[dirttrackracer]

needle nose vice grips, pull up while un screwing it

 

[martin]

Not sure if it's the same as the 91 but if it's the molded in nut that's spinning, your best option is to cut the screw in half with a small off cut wheel on a dremel. Had to do it on all the airbox screws on my 91.

 

[holyford86]

I've removed the air box and grabbed onto the insert with a small pair of vicegrips before.

 

[cubewhiz]

I'm a little ashamed it took this long, but yesterday I finally got around to this.

I took this opportunity to test for the first time the 4" angle grinder I bought.

I used a couple of zip ties to secure the top of the box back on.

Thanks for the help!