Welcome Visitor! Please take a few seconds and Evil_Twin
Member
- Joined
- Nov 20, 2008
- Messages
- 14
- Vehicle Year
- 1997
- Transmission
- Manual
I need a picture of a (1997) 2.3 engine bay.. I did a swap and have a vacuum line not hooked up. The line is red, on the passenger side of the block. There is another red and green that is hooked to a round black plastic device (forgive me, I forgot the appropriate name). I also have a unused line off of the round vacuum canister mounted on the frame rail.. the diameter of that line is much smaller than the red line, so I don't know if I lost an adapter or whatever.
Also, there is what I believe to be a coolant temperature sending unit by the thermostat housing, I cannot find the harness plug in for the life of me. I took alot of pictures prior to removal, but apparently I didn't take any of what I am looking for.
Also, there is what I believe to be a coolant temperature sending unit by the thermostat housing, I cannot find the harness plug in for the life of me. I took alot of pictures prior to removal, but apparently I didn't take any of what I am looking for.
