C6?

[Chris114]

I have been scrolling this for a while, only found one mention of the c6, and its not in the tech that i saw. Im building a bii crawler. 97 exploder 302 and c6 and have a question about the flywheel. Will the c6 work with the stock flywheel on the motor?

Sent from my SM-G930P using Tapatalk

 

[fangotango306]

Yes if it came from a 4r70. Both use 164 tooth 14.23" diameter flex plate. You will need the separator plate for a c6 between block and trans for proper distance for the starter, c6 plate is thicker. Also, You will have to measure the pattern to get the correct converter.

 

[Chris114]

Thanks for the quick reply. That relieves quite a bit of stress.

Sent from my SM-G930P using Tapatalk

 

[fangotango306]

No problem.