C clip eliminators

[l0sts0ul]

Hey guys. I have a 94 ranger splash with a 98 8.8 posi rear end.

I have to install c clip eliminators and I need to install aftermarket axels. Can someone tell me if you've ever successfully done the c clip eliminator install and what kit you used as I can't find a brand that lists parts.

Thanks

 

[PlumCrazy]

Only kit out there is the Yukon Ultimate 88 kit, and it only fits the 31 spline Expo application.

Why do you "need" C-Clip eliminators?

 

[l0sts0ul]

I need them because of the limitations on my et at the track. Below 11.5 need them and aftermarket axels

 

[PlumCrazy]

Sounds like you will need to upgrade to a 31 spline 8.8, or swap to a 9" (already semi float)

Curious to know what work the truck has done to get it under 11.5?

 

[l0sts0ul]

Hey.
I actually just got off the phone with moser and they make the only kit available.

It's got a 347 and some other goodies. I built the entire truck myself. Including the tranny, engine, diff everything.

 

[faststang90]

i just tried it and I was told no one makes it for a truck. I had to do 9 inch ends. my trucks best pass so for is a 11.80. to do the gear change, 9 inch ends, and new brakes was 2600+

 

[l0sts0ul]

I found moser does make a set of eliminators for my truck. But I need now to find axels. May still end up going 9"

 

[faststang90]

I was off by a little on price. yeah I would talk to them again that is who I was talking to and the truck housing is not the same as the car housing. the bearings are bigger on a truck.

 

[shane96ranger]

Will they let you install rear disc instead? Might be a nicer alternative.