broke timing belt HELP!!

[Gum-B]

ok so i was out playing and my truck died. So i tried to re start it, and nothing. so my buddy pulled me home it was only like 15 miles not fun. i got the truck home and could not figure out what was going on. I thought it was my alt at first so i tried checking that but then i could smell fuel so i pulled my intake pipe off and it was blowing air/fuel out of the intake. I pulled the timing belt cover back to see an exposed pulley. Now my question is am i totally f'ed or am i ok. I did try to start the motor while the belt was of cuz i did not know that was the problem. The motor is the 2.3L. And if i did not destroy my valves, or my head how hard is it to get the timing back to where it needs to be for the truck to run. I knew i should have taken my bronco out. Being broke down in the mud sucks.

 

[Wicked_Sludge]

the 2.3 is non-interference...no bent valves here.

just align the timing marks a toss a new belt on. i usually replace the tensioner while im in there.

 

[mikepotts]

the 2.3 is non-interference...no bent valves here.

just align the timing marks a toss a new belt on. i usually replace the tensioner while im in there.

x' 2... you should be in good shape, put'er back together and keep on truckin!

 

[ejholmgren]

Breaker bar on the driver's side frame rail does wonders for the crank bolt if you bump the starter

 

[Gum-B]

thanks for the help i will try to fix it after im back from hunting camp.