Blower Motor Wheel

[RajunCajun]

I got a '89 B2 that needs a new blower motor wheel. Yall got a part number for that by chance or maybe a spare?

 

[509lifted]

just go get a new blower motor they are cheap and plentyful

 

[fyre82]

Are you asking about the motor or the fan attached to the motor?
Or squirrel cage in some circles . . .

 

[RajunCajun]

Squirrel cage, but I found one at the part house that was close enough until my new one gets here. Its just to cold not to have heat right now. I believe the wheel I have now is for the explorer.

 

[fyre82]

Its just to cold not to have heat right now.

I hear that, it's a balmy 0 this morning here.

Glad you found something to work.

Rich

 

[wildbill23c]

Autozone P/N: 35601
Napa Auto P/N: TEM 937092

I just put a new blower motor in my 84 Bronco 2 a couple weeks ago, pretty simple to take out and the only issue I had was the stupid blower motor squirrel cage was stuck on the shaft of the old motor pretty bad, managed to get it off, but I think this summer I'll replace it as I broke a couple pieces off the plastic fins while trying to get it off the old motor shaft.

I paid $20 for the motor at Autozone, and the squirrel cage is about $15 at Autozone and $20 at NAPA.

 

[RajunCajun]

I'm done with the platic ones, I bought the metal wheel. It came with a set screw which is awesome! It took me a couple of tries to get it seated in there nicely. The metal one is for the 4.0, so I had to take it in and out a few times. Ill get the part number up for yall when I get off work, but I think I threw the box out. It blows about the same if not more. I believe the new one has more blades on it, but smaller in diameter. All in all, I'm warm and toasty. If I did perhaps throw it out, O'reillys is the place I bought it from. Kinda pricey though at 29 bones.

 

[wildbill23c]

The 2 part numbers I listed above were metal wheels as well. When I replace mine this spring I'll be going to the metal one as well, I broke a few fins on the plastic one trying to get it off the old motor, didn't have the extra money to replace both.