I have a 1994 2.3l Ranger. I am going to be replacing my shocks/struts, Coils, and Upper/lower ball joints. What else should I replace while i'm Doing this work?? any ideas?
Thanks.
-David
Thanks.
-David
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Basic Maintenance Tips?
- Thread starter Dddaviso7
- Start date
bluovaldude
Well-Known Member
- Joined
- Aug 7, 2007
- Messages
- 252
Check the Radius arm bushings, tie rod ends, power steering pump, anything conected in with the steering. I beam bushings. Just about everything that moves.
While you are under there it never hurts to just check it all out.
While you are under there it never hurts to just check it all out.
volrath
Well-Known Member
don't forget the sway bar bushings.
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
