b3000 bellhousing bolts

[cvrkickercomp]

I recently replaced the clutch, flywheel, pressureplate, t/o bearing, and pilot bearing in my truck but i'm stuck the p/o failed to mention that he never put the top bolts back into the bellhousing so all this time i've been driving around with 4 lower bolts holding on my transmission. My question was does anyone know the length and thread size/pitch of the top bolts on the m5r1 trans the truck is a 1994 mazda b3000 2wd 3.0l any help would be amazing! My cousin who works at a dealership was supposed to order me the bolts but that was a week ago and i can't go much longer without a truck... Thanks again

Tyler

 

[Grandpa's S/S]

Bolts

I can't remember the exact size but the other 4 are the same size. about 3 1/2" long and 12m-150 or 125. I can't remember. Which ever is closer to a 3/8-16.