Welcome Visitor! Please take a few seconds and woofer2609
Member
Hi All, I just joined up after visiting a few times! I have an '04 Mazda B2300 reg cab with Air Ride bags, some custom made camper tie downs bolted to the frame, and not too many other mods, just the usual fanatic maintenance and such.
The trucks used for towing my small fishing boat, commuting, and for carrying my slide in camper (which has taken project time away from the truck working on it instead) I am committed to swapping out my 7.5 for pretty much anything! I saw a good thread on here (having trouble finding it again actually) about swapping out a 7.5 for a 28/8.8 ranger w/ posi, which is probably what I will do, or try and find a 31 spline 8.8 torsen. question is, did they make any 31 spline driveshafts for regular cabs, as I assume they are different lengths. Anyway, with a 8.8, if it swaps right over, I'll replace the innards with a Powertrax (I think)
The trucks used for towing my small fishing boat, commuting, and for carrying my slide in camper (which has taken project time away from the truck working on it instead) I am committed to swapping out my 7.5 for pretty much anything! I saw a good thread on here (having trouble finding it again actually) about swapping out a 7.5 for a 28/8.8 ranger w/ posi, which is probably what I will do, or try and find a 31 spline 8.8 torsen. question is, did they make any 31 spline driveshafts for regular cabs, as I assume they are different lengths. Anyway, with a 8.8, if it swaps right over, I'll replace the innards with a Powertrax (I think)
