Auto to Manual Hub Conversion

[ganny76]

Did this last night on my 97. Converted to some Warn manual hubs. I dont think I have every done anything mechanically that is easier. The directions from TRS were great. I want to thank TRS and everyone that contributes to this board. The 4x4 place was going to charge me $500 to do it (parts + labor). I did it for $240. Thanks again.

 

[97ranger4x4]

yeh its a sweet setup. I was so happy when I converted mine. They are so much more reliable not to meniton the use of 2WD low can be a real help when manuvering in tight areas with a load or trailer.

 

[dennis461]

Need you old parts

Ganny,
I need you old parts, most important is the plastic-spring-thing that fits on the sipindle nut
Yours is the Dana 35 axle, right?
Dennis in NJ

 

[rangerT]

yeh its a sweet setup. I was so happy when I converted mine. They are so much more reliable not to meniton the use of 2WD low can be a real help when manuvering in tight areas with a load or trailer.

NICE!!!!!!i never thought of that but could come in handy when pulling/hauling something heavy for a short distance......very cool

 

[ganny76]

Dennis,
Sorry, I have already discarded the used hubs.

 

[97ranger4x4]

Yeh 2wd Low is MONEY!!! I think I use if more than I do 4wd.

 

[dennis461]

Dennis,
Sorry, I have already discarded the used hubs.

The dealer wants $300 for the right one, and $300 for the left one.

 

[97ranger4x4]

Ebay?