AOD TC bolts

[88mudder]

how tight are the Torque Converter bolts supposed to be? The ones that hold the converter to the flexplate...

Also im leaking tranny fluid alittle bit...its drippin somewhere around the bellhousing and collecting on the bottom of the bell...any possible problems?

 

[projectnitemare]

The TC bolts aren't going to be super tight. I forget the number off the top of my head but a socket on a standard 3/8 rachet will be fine. Don't forget the loctite. As for the leak, either a pump seal or the seal for the input. Either way it will leak more and you'll be pulling the trans.

Matt