any swaps for 99 range t case

[DANIELVINCENT]

i have the 4.0 L auto trany is there any t-cases i can swap out that will work like dana 20 or dana 300 i need to clock it lower so it can clear my tranny x member wont interfre with my front drive line

 

[Ford78]

As far as i know most build a new mount so the front driveshaft clears, that what i plan on doing when i get that far. Even with a tranfercase swap u will still have to re-fab the mount.

 

[DANIELVINCENT]

As far as i know most build a new mount so the front driveshaft clears, that what i plan on doing when i get that far. Even with a tranfercase swap u will still have to re-fab the mount.

yes that is true but with 14 invh coilovers its allways in the way

 

[Ford78]

U should be able to make the mount on the inside of the frame instead of under where your arms go.

 

[Ford78]

Also how did u fab your steering shaft. im trying to find the right size joint that goes into the steering box, but have not found the correct answer yet . i think it is 11/16 36 spline but not for sure.

 

[DANIELVINCENT]

Also how did u fab your steering shaft. im trying to find the right size joint that goes into the steering box, but have not found the correct answer yet . i think it is 11/16 36 spline but not for sure.

well i got the yato steering boc and had the joint that locked it on and welled it on my stock shaft and it worked

 

[Ford78]

thanks,any pics of it. sorry about jacking your thread.