• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Anderson power pipe.


It's a cold air intake - I don't think you'll find anything particularly special about one vs another, and there's been tons of discussion about them (generically) here in the past.
It’s just a CAI... nevermind, you’re better off with the Anderson SB350 I posted.
 
Personally, I only use sour cream and onion for my cold air intakes.

5622385747a4f7e86adf448011aac9ea3d37441d_1.jpg
 
Actually the Anderson power pipe is good for 8-10 hp..problem is where are you going to put a 4 inch pipe.. we shall find out here soon!
 
Last edited:
Good luck with that.
 
Actually the Anderson power pipe is good for 8-10 hp..problem is where are tou going g to out a 4 inch pipe.. we shall find out here soon!

If you believe that I have some stickers I could sell you. Guaranteed 50hp boost.
 
Ok. So if the intake tube is 4”. Do you also have a throttlebody with a 4” internal diameter? If the throttle body is smaller, then all that extra tube size is wasted since the throttlebody is restricting flow.
 
го́пник!

What is power pipe? Blyat!

You do not need power pipe. Cone air filter does same.

In fact, follow Comrade Boris' instructions and Slav your car.






Adidas Stripes worth more at the wheels than "power pipe."

Power pipe.... СУКА бЛЯТЬ!
 
Ok. So if the intake tube is 4”. Do you also have a throttlebody with a 4” internal diameter? If the throttle body is smaller, then all that extra tube size is wasted since the throttlebody is restricting flow.
Obviously no on a 4 inch throttle body.. but trust me.I need all the air flow I can get. Probably could get away with a 3 1/2 inch tube. We'll see . Problem is no space under the hood of these things
 
Obviously no on a 4 inch throttle body.. but trust me.I need all the air flow I can get. Probably could get away with a 3 1/2 inch tube. We'll see . Problem is no space under the hood of these things

Im busy go away.
 
Obviously no on a 4 inch throttle body.. but trust me.I need all the air flow I can get. Probably could get away with a 3 1/2 inch tube. We'll see . Problem is no space under the hood of these things
You could relocate the battery. I did that to make a cold air kit. I posted pictures somewhere on here.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top