a4ld shift kit install thread?

[trikerider]

did a search w/no results for a transgo shift kit install for the '94 auto?
can anyone point me to one here or in explorer forum?
the kit came with an instruction sheet but hopeing to find additional info before I pull the valve body - so's I can be fully prepared for any surprises.
btw this '94 ranger 4x4 is the first auto trans vehicle I've ever owned.
thanks in advance for any tips

 

[trikerider]

to answer my own question there is a thread on "serious explorations' forum for rangers and explorers that covers everything I need to know - with pix, part numbers, diagrams from factory maunals - etc.

 

[trikerider]

and to update again in preparation to dropping the pan I raised the truck on jacks for clearance/working room and used my air drill to install a self drilling/tapping screw 1/4"x1/2" length with a sealing washer through the center sepression of the pan which is thicker than I thought it would be (gratefully)
maybe a teaspoon of fluid escaped after the drill pierced the steel. less than I thought would escape. I think this would be reusable as is but when I pull the valve body to make the mods and install the kit I'm going to braze in a 1/4" reducer to 1/8 pipe plug and use an allen plug for clearance which will stick out only about 1/4" from the pan. and of course make for easy, no mess drains in the future