95 explorer 4x4 transmission & transfer to 2000 ranger 4x4 will it work

[jimbondiane]

hello my 4.0 ranger transmissions reverse went out and i have the tranny & transfer from a 95 explorer, would it work and would i be better off to switch both or just the transmission I've done used the shift servo off the transfer case on my ranger i had to change the wiring harness! I don't know what motor the explorer had. any help would be greatly appreciated
Jimbo n Diane

 

[adsm08]

Different tranny. Wont work right. It would be important to know which engine was in the explorer to.

Also, you have never "done did" anything.

Postin' from teh Galaxy

 

[Snoranger]

Different transfercase too.

 

[adsm08]

Different transfercase too.

Maybe. Didn't the 95 use the 1354 still? As long as it isn't an AWD unit the t-case should be the same aside from a different front output.

 

[Snoranger]

Maybe. Didn't the 95 use the 1354 still? As long as it isn't an AWD unit the t-case should be the same aside from a different front output.

Nope.
All genII v6 Explorers used the 44-05.
IIRC, All genII v8 AWD Explorers used the 44-04.