Welcome Visitor! Please take a few seconds and seabeeranger
Well-Known Member
I have a 94 ranger, 302, 4x4. Already has a factory tach and had a manual 2.3L originally, I've tried looking online for getting the factory tach to work but I mostly see 96 and newer. Theres 2 plugs in the back of the cluster, Both are 14pin. If you are sitting in the truck, the plug on the left is missing 1 pin in slot 7, the plug on the right is missing 2 pins in slot 6,7. What I've seen online is adding a ground wire into one of them but I don't know which on my truck.
