Welcome Visitor! Please take a few seconds and 00srad600
Well-Known Member
Ok so I'm building a little monster. I have a 88 ford ranger with a 95 Nissan 9.25 rear end with 4.66 gears and 14 inch disks brakes. Then the front I got a Nissan vg30e built in to a vg30dett with an inner cooler I'm thinking like 300hp and 283 ftlb. Lift the rear a do a SAS or upgrade the front to a Dana 35 with 8 inches of lift and a hi steer set up with 44 outters.
But what I need now is a 49 inch driveshaft with 1310 ujoints so I can set a drive line up wondering if anything stock would have it in aluminum so I can just use that. Maybe I mean its not real long and common ujoints. Any help would be great
But what I need now is a 49 inch driveshaft with 1310 ujoints so I can set a drive line up wondering if anything stock would have it in aluminum so I can just use that. Maybe I mean its not real long and common ujoints. Any help would be great
