84 duraspark???

[prestonrucker]

so i installed everything and wired it up just like the tech library explains. and still no spark to my plugs! so what else could be the problem?

 

[kimcrwbr1]

#1 do you have power to the coil pos and the red wire on the module with the key on
#2 green on module to neg on the coil and is the coil base groundesd to the block
#3 three wires to the dizzy from the module ground from dizzy to black on module the other two dont matter if they are switched they go thru pickup coil
#4 run a wire from the start solenoid start wire from the ignition to the white on the module.
#5 just use the stock TFI square coil is all you will ever need for that setup.
Once you get it wired put a spark plug in the coil wire and set it on ground and crank it and see if it sparks steady blue. If not test your coil leave the plug in the coil wire and turn the key on, take a jumper wire from neg of the coil and short it to ground quick touches it should spark every time you trigger it that way. If you get spark it is the module or dizzy no spark is a bad coil. let us know what you find out.