Welcome Visitor! Please take a few seconds and IndyRJ
New Member
- Joined
- Dec 20, 2008
- Messages
- 1
- Transmission
- Automatic
I have a 1992 Ranger. I have changed the Transfer motor.
When I push the 4 high botton the Trasfer module Clicks - the transfer motor turns and engages the front drive shaft for about 3 second then there is a click - like the magnet releases and it drops out of 4x4 - the lights never come on - the front wheels do not lock in (dont think they have time)
I have learned that the Brown wire is the magnet. I also see that there is 2 other wires that go to a sensor? and then there is the 2 wires and speedomitor cable at the top..
Does any one know why it does not stay in 4x4, whay lights do not come on, and what that sensor is?
Thanks RON
When I push the 4 high botton the Trasfer module Clicks - the transfer motor turns and engages the front drive shaft for about 3 second then there is a click - like the magnet releases and it drops out of 4x4 - the lights never come on - the front wheels do not lock in (dont think they have time)
I have learned that the Brown wire is the magnet. I also see that there is 2 other wires that go to a sensor? and then there is the 2 wires and speedomitor cable at the top..
Does any one know why it does not stay in 4x4, whay lights do not come on, and what that sensor is?
Thanks RON
