Welcome Visitor! Please take a few seconds and stouter11
New Member
- Joined
- Jan 25, 2011
- Messages
- 1
- Vehicle Year
- 1999
- Transmission
- Automatic
ok so ive been having problems with my 4x4 locking in. i replaced the o-rings on the hubs and replace the vacuum lines but im still not getting the hubs to lock in. transfer case and is working and shift motor is working correctly but the hubs are still not locking in. the vacuum line on the driver side is a little stronger than the passenger side line. a few tabs broke off the plastic cap dont know if that would have anything to do with the 4x4 not working. im trying to see if anyone has anymore suggestions to fix the problem
