• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

35s or 33's with stock gears?...for now


rangerdude91

Well-Known Member
Joined
Dec 26, 2008
Messages
243
Age
33
City
virginia
Vehicle Year
2005,1989
Transmission
Automatic
i have a 1995 4x4 automatic 4.0L with a 4in RC lift and 31's. over the summer im putting a 3in body lift and new body bushings. i really would like to put 35's but i dont want to break anything( axles mainly). i really dont care about my gas mileage because ive got a 88 mini cooper for that. does anyone have 35's with stock gears? later on like next summer i might change the gears but for now i dont have the time


thanks for looking


nathan
 
I ran 35's with my 91 4.0L auto and stock 3.55 gears for about 6 months without breakage problems. It was just a dog on the street and sucked back the gas pretty good.
 
so then i guess it was hard to get up to speed? it is my DD until december so i wouldnt be driving it much after that except when i take out my dirtbike and need to haul stuff
 
I ran 35's with 3.27s for a while. It was a dog on the street. I couldn't even use 5th gear going 70 because I would lose all power. I wouldn't recommend it if your engine is at all tired or worn out because it wont be good to drive. I have 5.13s now and love it... i would never go back...
 
yeah the truck has 218k but the person before me said it was rebuilt but he didnt do it it was the guy before hime so i dont know. it still has alot of power but it is like 14 years old. i dont even know what gears i have. my girlfriend really doesnt want me to get 35's( she's short) she was happy when i mentioned 33's haha
 
I wouldn't run anything lower (numerically) that a 4.10 with 33's and atleast 4.56 for 35's.

I am going to be running 4.56 with 33's after the 351 swap into my big bronco just to keep the engine happy.

I had 31's on my explorer with the stock 3.73 and it felt a little gutless on the take off, and my big bronco was a dog (right up till the engine died) with 33's and 3.55's ........... and thats with a 302 ......... 25 - 30 more hp and around 50 more ft/lb more torque than a 4.0L

35's and anything lower (numerically) than a 4.56 and you WILL have transmission problems
 
Last edited:
ok well i guess ll just go with the 33's. i had some one from a friend(pretty much worn) and it seemed to do about the same as the 31's so i guess i just get myself a good pair of 33's and just run those

thanks for all your help


nathan
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top